Module javafx.base

Interface ObservableValue<T>

Type Parameters:
T - The type of the wrapped value.
All Superinterfaces:
Observable
All Known Subinterfaces:
Binding<T>, JavaBeanProperty<T>, NumberBinding, NumberExpression, ObservableBooleanValue, ObservableDoubleValue, ObservableFloatValue, ObservableIntegerValue, ObservableListValue<E>, ObservableLongValue, ObservableMapValue<K,V>, ObservableNumberValue, ObservableObjectValue<T>, ObservableSetValue<E>, ObservableStringValue, Property<T>, ReadOnlyJavaBeanProperty<T>, ReadOnlyProperty<T>, TextInputControl.Content
All Known Implementing Classes:
BooleanBinding, BooleanExpression, BooleanProperty, BooleanPropertyBase, DoubleBinding, DoubleExpression, DoubleProperty, DoublePropertyBase, FloatBinding, FloatExpression, FloatProperty, FloatPropertyBase, IntegerBinding, IntegerExpression, IntegerProperty, IntegerPropertyBase, JavaBeanBooleanProperty, JavaBeanDoubleProperty, JavaBeanFloatProperty, JavaBeanIntegerProperty, JavaBeanLongProperty, JavaBeanObjectProperty, JavaBeanStringProperty, ListBinding, ListExpression, ListProperty, ListPropertyBase, LongBinding, LongExpression, LongProperty, LongPropertyBase, MapBinding, MapExpression, MapProperty, MapPropertyBase, NumberExpressionBase, ObjectBinding, ObjectExpression, ObjectProperty, ObjectPropertyBase, ObservableValueBase, ReadOnlyBooleanProperty, ReadOnlyBooleanPropertyBase, ReadOnlyBooleanWrapper, ReadOnlyDoubleProperty, ReadOnlyDoublePropertyBase, ReadOnlyDoubleWrapper, ReadOnlyFloatProperty, ReadOnlyFloatPropertyBase, ReadOnlyFloatWrapper, ReadOnlyIntegerProperty, ReadOnlyIntegerPropertyBase, ReadOnlyIntegerWrapper, ReadOnlyJavaBeanBooleanProperty, ReadOnlyJavaBeanDoubleProperty, ReadOnlyJavaBeanFloatProperty, ReadOnlyJavaBeanIntegerProperty, ReadOnlyJavaBeanLongProperty, ReadOnlyJavaBeanObjectProperty, ReadOnlyJavaBeanStringProperty, ReadOnlyListProperty, ReadOnlyListPropertyBase, ReadOnlyListWrapper, ReadOnlyLongProperty, ReadOnlyLongPropertyBase, ReadOnlyLongWrapper, ReadOnlyMapProperty, ReadOnlyMapPropertyBase, ReadOnlyMapWrapper, ReadOnlyObjectProperty, ReadOnlyObjectPropertyBase, ReadOnlyObjectWrapper, ReadOnlySetProperty, ReadOnlySetPropertyBase, ReadOnlySetWrapper, ReadOnlyStringProperty, ReadOnlyStringPropertyBase, ReadOnlyStringWrapper, SetBinding, SetExpression, SetProperty, SetPropertyBase, SimpleBooleanProperty, SimpleDoubleProperty, SimpleFloatProperty, SimpleIntegerProperty, SimpleListProperty, SimpleLongProperty, SimpleMapProperty, SimpleObjectProperty, SimpleSetProperty, SimpleStringProperty, SimpleStyleableBooleanProperty, SimpleStyleableDoubleProperty, SimpleStyleableFloatProperty, SimpleStyleableIntegerProperty, SimpleStyleableLongProperty, SimpleStyleableObjectProperty, SimpleStyleableStringProperty, StringBinding, StringExpression, StringProperty, StringPropertyBase, StyleableBooleanProperty, StyleableDoubleProperty, StyleableFloatProperty, StyleableIntegerProperty, StyleableLongProperty, StyleableObjectProperty, StyleableStringProperty

public interface ObservableValue<T> extends Observable
An ObservableValue is an entity that wraps a value and allows to observe the value for changes. In general this interface should not be implemented directly but one of its sub-interfaces (ObservableBooleanValue etc.).

The value of the ObservableValue can be requested with getValue().

An implementation of ObservableValue may support lazy evaluation, which means that the value is not immediately recomputed after changes, but lazily the next time the value is requested (see note 1 in "Implementation Requirements").

An ObservableValue generates two types of events: change events and invalidation events. A change event indicates that the value has changed (see note 2 in "Implementation Requirements"). An invalidation event is generated if the current value is not valid anymore. This distinction becomes important if the ObservableValue supports lazy evaluation, because for a lazily evaluated value one does not know if an invalid value really has changed until it is recomputed. For this reason, generating change events requires eager evaluation while invalidation events can be generated for eager and lazy implementations.

Implementations of this class should strive to generate as few events as possible to avoid wasting too much time in event handlers. Implementations in this library mark themselves as invalid when the first invalidation event occurs. They do not generate any more invalidation events until their value is recomputed and valid again.

Two types of listeners can be attached to an ObservableValue: InvalidationListener to listen to invalidation events and ChangeListener to listen to change events.

Important note: attaching a ChangeListener enforces eager computation even if the implementation of the ObservableValue supports lazy evaluation.

Implementation Requirements:
  1. All bindings and properties in the JavaFX library support lazy evaluation.
  2. All implementing classes in the JavaFX library check for a change using reference equality (and not object equality, Object#equals(Object)) of the value.
Since:
JavaFX 2.0
See Also:
  • Method Summary

    Modifier and Type
    Method
    Description
    void
    addListener(ChangeListener<? super T> listener)
    Adds a ChangeListener which will be notified whenever the value of the ObservableValue changes.
    default <U> ObservableValue<U>
    flatMap(Function<? super T,? extends ObservableValue<? extends U>> mapper)
    Returns an ObservableValue that holds the value of an ObservableValue produced by applying the given mapping function on this value.
    Returns the current value of this ObservableValue
    default <U> ObservableValue<U>
    map(Function<? super T,? extends U> mapper)
    Returns an ObservableValue that holds the result of applying the given mapping function on this value.
    orElse(T constant)
    Returns an ObservableValue that holds this value, or the given constant if it is null.
    void
    removeListener(ChangeListener<? super T> listener)
    Removes the given listener from the list of listeners that are notified whenever the value of the ObservableValue changes.
    Returns an ObservableValue that holds this value and is updated only when condition holds true.

    Methods declared in interface javafx.beans.Observable

    addListener, removeListener
  • Method Details

    • addListener

      void addListener(ChangeListener<? super T> listener)
      Adds a ChangeListener which will be notified whenever the value of the ObservableValue changes. If the same listener is added more than once, then it will be notified more than once. That is, no check is made to ensure uniqueness.

      Note that the same actual ChangeListener instance may be safely registered for different ObservableValues.

      The ObservableValue stores a strong reference to the listener which will prevent the listener from being garbage collected and may result in a memory leak. It is recommended to either unregister a listener by calling removeListener after use or to use an instance of WeakChangeListener avoid this situation.

      Parameters:
      listener - The listener to register
      Throws:
      NullPointerException - if the listener is null
      See Also:
    • removeListener

      void removeListener(ChangeListener<? super T> listener)
      Removes the given listener from the list of listeners that are notified whenever the value of the ObservableValue changes.

      If the given listener has not been previously registered (i.e. it was never added) then this method call is a no-op. If it had been previously added then it will be removed. If it had been added more than once, then only the first occurrence will be removed.

      Parameters:
      listener - The listener to remove
      Throws:
      NullPointerException - if the listener is null
      See Also:
    • getValue

      T getValue()
      Returns the current value of this ObservableValue
      Returns:
      The current value
    • map

      default <U> ObservableValue<U> map(Function<? super T,? extends U> mapper)
      Returns an ObservableValue that holds the result of applying the given mapping function on this value. The result is updated when this ObservableValue changes. If this value is null, no mapping is applied and the resulting value is also null.

      For example, mapping a string to an upper case string:

      
       var text = new SimpleStringProperty("abcd");
       ObservableValue<String> upperCase = text.map(String::toUpperCase);
      
       upperCase.getValue();  // Returns "ABCD"
       text.set("xyz");
       upperCase.getValue();  // Returns "XYZ"
       text.set(null);
       upperCase.getValue();  // Returns null
       
      Type Parameters:
      U - the type of values held by the resulting ObservableValue
      Parameters:
      mapper - the mapping function to apply to a value, cannot be null
      Returns:
      an ObservableValue that holds the result of applying the given mapping function on this value, or null when it is null; never returns null
      Throws:
      NullPointerException - if the mapping function is null
      Since:
      19
    • orElse

      default ObservableValue<T> orElse(T constant)
      Returns an ObservableValue that holds this value, or the given constant if it is null. The result is updated when this ObservableValue changes. This method, when combined with map(Function), allows handling of all values including null values.

      For example, mapping a string to an upper case string, but leaving it blank if the input is null:

      
       var text = new SimpleStringProperty("abcd");
       ObservableValue<String> upperCase = text.map(String::toUpperCase).orElse("");
      
       upperCase.getValue();  // Returns "ABCD"
       text.set(null);
       upperCase.getValue();  // Returns ""
       
      Parameters:
      constant - the value to use when this ObservableValue holds null; can be null
      Returns:
      an ObservableValue that holds this value, or the given constant if it is null; never returns null
      Since:
      19
    • flatMap

      default <U> ObservableValue<U> flatMap(Function<? super T,? extends ObservableValue<? extends U>> mapper)
      Returns an ObservableValue that holds the value of an ObservableValue produced by applying the given mapping function on this value. The result is updated when either this ObservableValue or the ObservableValue produced by the mapping changes. If this value is null, no mapping is applied and the resulting value is null. If the mapping resulted in null, then the resulting value is also null.

      This method is similar to map(Function), but the mapping function is one whose result is already an ObservableValue, and if invoked, flatMap does not wrap it within an additional ObservableValue.

      For example, a property that is only true when a UI element is part of a Scene that is part of a Window that is currently shown on screen:

      
       ObservableValue<Boolean> isShowing = listView.sceneProperty()
           .flatMap(Scene::windowProperty)
           .flatMap(Window::showingProperty)
           .orElse(false);
      
       // Assuming the listView is currently shown to the user, then:
      
       isShowing.getValue();  // Returns true
      
       listView.getScene().getWindow().hide();
       isShowing.getValue();  // Returns false
      
       listView.getScene().getWindow().show();
       isShowing.getValue();  // Returns true
      
       listView.getParent().getChildren().remove(listView);
       isShowing.getValue();  // Returns false
       
      Changes in any of the values of: the scene of listView, the window of that scene, or the showing of that window, will update the boolean value isShowing.

      This method is preferred over Bindings methods since it is type safe.

      Type Parameters:
      U - the type of values held by the resulting ObservableValue
      Parameters:
      mapper - the mapping function to apply to a value, cannot be null
      Returns:
      an ObservableValue that holds the value of an ObservableValue produced by applying the given mapping function on this value, or null when the value is null; never returns null
      Throws:
      NullPointerException - if the mapping function is null
      Since:
      19
    • when

      default ObservableValue<T> when(ObservableValue<Boolean> condition)
      Returns an ObservableValue that holds this value and is updated only when condition holds true.

      The returned ObservableValue only observes this value when condition holds true. This allows this ObservableValue and the conditional ObservableValue to be garbage collected if neither is otherwise strongly referenced when condition holds false. This is in contrast to the general behavior of bindings, where the binding is only eligible for garbage collection when not observed itself.

      A condition holding null is treated as holding false.

      For example:

      
       ObservableValue<Boolean> condition = new SimpleBooleanProperty(true);
       ObservableValue<String> longLivedProperty = new SimpleStringProperty("A");
       ObservableValue<String> whenProperty = longLivedProperty.when(condition);
      
       // observe whenProperty, which will in turn observe longLivedProperty
       whenProperty.addListener((ov, old, current) -> System.out.println(current));
      
       longLivedProperty.setValue("B");  // "B" is printed
      
       condition.setValue(false);
      
       // After condition becomes false, whenProperty stops observing longLivedProperty; condition
       // and whenProperty may now be eligible for GC despite being observed by the ChangeListener
      
       longLivedProperty.setValue("C");  // nothing is printed
       longLivedProperty.setValue("D");  // nothing is printed
      
       condition.setValue(true);  // longLivedProperty is observed again, and "D" is printed
       
      Parameters:
      condition - a boolean ObservableValue, cannot be null
      Returns:
      an ObservableValue that holds this value whenever the given condition evaluates to true, otherwise holds the last seen value; never returns null
      Since:
      20